DMP ํŒฉํ† ๋ฆฌ 350 ์ด์ค‘ ๊ฐœ๋ฐฉ

ํ†ตํ•ฉ๋œ ํŒŒ์šฐ๋” ๊ด€๋ฆฌ

DMP Factory 350 Dual์€ ์ƒ์‚ฐ์„ฑ๊ณผ ๋ฐ˜๋ณต์„ฑ์„ ํ–ฅ์ƒ์‹œ์ผœ ์šด์˜ ๋น„์šฉ์„ ์ ˆ๊ฐํ•ฉ๋‹ˆ๋‹ค. ์ด ํ”„๋ฆฐํ„ฐ๋Š” ํŒŒ์šฐ๋” ์ฒ˜๋ฆฌ ๋ฐ ์ฒด์งˆ ๊ธฐ๋Šฅ์„ ํ†ตํ•ฉํ•˜์—ฌ ์ž‘์—…์ž์™€ ํ™˜๊ฒฝ์ด ํŒŒ์šฐ๋”์— ๋…ธ์ถœ๋˜๋Š” ๊ฒƒ์„ ์ค„์—ฌ์ค๋‹ˆ๋‹ค. ๋˜ํ•œ ํ†ตํ•ฉ ํŒŒ์šฐ๋” ๊ด€๋ฆฌ๋ฅผ ํ†ตํ•ด ํŒŒ์šฐ๋”์˜ ์žฌํ™œ์šฉ์„ฑ๊ณผ ์‚ฌ์šฉ๋Ÿ‰์„ ๊ทน๋Œ€ํ™”ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. 

์–‘๋ฐฉํ–ฅ ์žฌ์ฝ”ํŒ…, ์ตœ์ € ์‚ฐ์†Œ ํ•จ๋Ÿ‰์„ ์œ„ํ•œ ์—…๊ณ„ ์ตœ๊ณ ์˜ ์ง„๊ณต ์ฑ”๋ฒ„, ๋‘ ๊ฐœ์˜ ๊ฐ•๋ ฅํ•œ 350 500 W ๋ ˆ์ด์ €, ๊ธ€๋Ÿฌ๋ธŒ ํฌํŠธ ์•ก์„ธ์Šค ๋“ฑ! ํ‘œ์ค€ ์ œ์ž‘ ๋ด‰ํˆฌ๋Š” 275 x 275 x 420 mm์ด๋ฉฐ ํšจ์œจ์ ์ธ ์žฌ๋ฃŒ๋กœ ๊ต์ฒดํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.
 

๊ธฐ์ˆ  ์‚ฌ์–‘

์™œ DMP ํ”Œ๋ ‰์Šค 350 ๋“€์–ผ์ธ๊ฐ€?

  • ์œ ์—ฐ์„ฑ ๊ตฌ์ถ•

    ์ธ์‡„ ๋ชจ๋“ˆ์„ ์‰ฝ๊ฒŒ ๊ต์ฒดํ•˜์—ฌ ์ธ์‡„์˜ ๋‹ค์–‘์„ฑ์„ ๊ทน๋Œ€ํ™”ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

  • ํŒŒ์šฐ๋” ๊ด€๋ฆฌ

    ํŒŒ์šฐ๋” ์ฒ˜๋ฆฌ์™€ ์ฒด์งˆ์„ ํ†ตํ•ฉํ•˜์—ฌ ๋…ธ์ถœ์€ ์ค„์ด๊ณ  ์‚ฌ์šฉ์€ ๊ทน๋Œ€ํ™”ํ•ฉ๋‹ˆ๋‹ค. 

  • ์ง„๊ณต ์ฑ”๋ฒ„

    ๋™๊ธ‰ ์ตœ๊ฐ•์˜ ์ง„๊ณต ์ฑ”๋ฒ„ design ๋Š” ๊ฐ€์žฅ ์ˆœ์ˆ˜ํ•œ ์ธ์‡„ ํ™˜๊ฒฝ์„ ์œ„ํ•ด <25 ppm์˜ ์‚ฐ์†Œ ํ™˜๊ฒฝ์„ ์œ ์ง€ํ•˜์—ฌ ์šฐ์ˆ˜ํ•œ ํ‘œ๋ฉด ๋งˆ๊ฐ ์ฒ˜๋ฆฌ๋ฅผ ์ œ๊ณตํ•ฉ๋‹ˆ๋‹ค. 

  • ์„œํฌํŠธ ๋ฏธํฌํ•จ

    ๋…ธ์„œํฌํŠธ๋Š” ์ง€์ง€ ๊ตฌ์กฐ๋ฌผ ์—†์ด ๊ธˆ์† ํŒŒ์šฐ๋” ๋ฒ ๋“œ ํ”„๋ฆฐํŒ…์„ ๊ฐ€๋Šฅํ•˜๊ฒŒ ํ•˜์—ฌ ์ƒ์‚ฐ ๋ฐ ๋ฐฐ์†ก์„ ๊ฐ€์†ํ™”ํ•ฉ๋‹ˆ๋‹ค. 

DMP ํŒฉํ† ๋ฆฌ 350 ์ด์ค‘ ์‚ฌ์–‘

๊ธฐ์ˆ  ์‚ฌ์–‘
DMP ํŒฉํ† ๋ฆฌ 350 ๋“€์–ผ ๊ธฐ์ˆ  ์‚ฌ์–‘
๋ ˆ์ด์ € ํŒŒ์›Œ ์œ ํ˜•2 x 500W/๊ด‘์„ฌ์œ  ๋ ˆ์ด์ €1
๋ ˆ์ด์ € ํŒŒ์žฅ1070nm
๋‹จ์ผ ๋นŒ๋“œ ๋ณผ๋ฅจ (X x Y x Z) ๋นŒ๋“œ ํ”Œ๋ ˆ์ดํŠธ ํฌํ•จ ๋†’์ด275 x 275 x 420mm
(10.82 x 10.82 x 16.54์ธ์น˜)
์ธต ๋‘๊ป˜์กฐ์ • ๊ฐ€๋Šฅ, ์ตœ์†Œ 5 ฮผm, ์ผ๋ฐ˜ ๊ฐ’: 30, 60, 90 ฮผm
๋“€์–ผ ๋ ˆ์ด์ € ๊ตฌ์„ฑ์„ ์œ„ํ•œ ๊ธˆ์† ํ•ฉ๊ธˆ ์˜ต์…˜:LaserForm Ti Gr5 (A)ยฒ, LaserForm Ti Gr23 (A)ยฒ, LaserForm AlSi10Mg (A)ยณ, LaserForm AlSi7Mg0.6 (A)ยณ, LaserForm 316L (A)ยณ, LaserForm CoCrF75 (A)ยณ, Certified M789 (A)ยณ
์žฌ๋ฃŒ ๋ถ„์‚ฌ ๋ฐฉ์‹์†Œํ”„ํŠธ ๋ธ”๋ ˆ์ด๋“œ ๋ฆฌ์ฝ”ํ„ฐ
๋ฐ˜๋ณต์„ฑฮ”x (3ฯƒ) = 60um, ฮ”y (3ฯƒ) = 60um, ฮ”z (3ฯƒ) = 60um
์ตœ์†Œ ์„ ํญ200 ฮผm
์ผ๋ฐ˜ ์ •ํ™•๋„ยฑ 0.1-0.2% ยฑ 100ฮผm ์•Œ๋ฃจ๋ฏธ๋Š„ ํฌํ•จ
์ œ์ž‘ ํ”Œ๋žซํผ ๊ฐ€์—ด250ยฐC
๊ธฐ์ˆ  ์‚ฌ์–‘ ์ „์ฒด ๋ชฉ๋ก ๋‹ค์šด๋กœ๋“œ
์†Œํ”„ํŠธ์›จ์–ด

3DXpert: ์ ์ธต ์ œ์กฐ๋ฅผ ์œ„ํ•œ ์—…๊ณ„ ์ตœ๊ณ ์˜ ์†Œํ”„ํŠธ์›จ์–ด

์™„์ „ ํ†ตํ•ฉ - ๋‹จ์ผ ํ™˜๊ฒฝ

3DXpert๋Š” ์ ์ธต ์ œ์กฐ๋ฅผ ์œ„ํ•œ ์›์Šคํ†ฑ ์ƒ์ ์ž…๋‹ˆ๋‹ค. DfAM, ๋นŒ๋“œ ์ค€๋น„, ์‹œ๋ฎฌ๋ ˆ์ด์…˜, ๊ฒ€์‚ฌ ๋“ฑ ๋ชจ๋“  AM ํ”„๋กœ์„ธ์Šค๋ฅผ ๋™์ผํ•œ ์†Œํ”„ํŠธ์›จ์–ด ํ™˜๊ฒฝ์—์„œ ์™„๋ฃŒํ•˜์—ฌ ์›Œํฌํ”Œ๋กœ๋ฅผ ๊ฐ„์†Œํ™”ํ•˜๊ณ  ํšจ์œจ์„ฑ์„ ๊ทน๋Œ€ํ™”ํ•˜๋ฉฐ ๋น„์šฉ์ด ๋งŽ์ด ๋“œ๋Š” ์˜ค๋ฅ˜๋ฅผ ๋ฐฉ์ง€ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

CAD to Slice ์›Œํฌํ”Œ๋กœ์šฐ๋กœ ํŒŒ์ผ ์ฒ˜๋ฆฌ ์‹œ๊ฐ„์„ ์ตœ๋Œ€ 75% ๋‹จ์ถ•ํ•˜์„ธ์š”. ๋” ์ด์ƒ ๊ธฐ๊ณ„์ ์œผ๋กœ ์„ค๊ณ„๋œ ๋ถ€ํ’ˆ์˜ ๋ฐ์ดํ„ฐ ๋ฌด๊ฒฐ์„ฑ์ด STL๋กœ ์ธํ•ด ์†์ƒ๋˜์ง€ ์•Š์Šต๋‹ˆ๋‹ค. 3DXpert๋Š” CAD ์—”์ง„์„ ๊ธฐ๋ฐ˜์œผ๋กœ ์ œ์ž‘๋˜์–ด ํžˆ์Šคํ† ๋ฆฌ ๊ธฐ๋ฐ˜์˜ ํŒŒ๋ผ๋ฉ”ํŠธ๋ฆญ ๋นŒ๋“œ ์ค€๋น„๊ฐ€ AM์˜ ์ƒˆ๋กœ์šด ํ‘œ์ค€์ด ๋˜์—ˆ์Šต๋‹ˆ๋‹ค. ํ•˜์ด๋ธŒ๋ฆฌ๋“œ DfAM์€ ์†”๋ฆฌ๋“œ, ๋ฉ”์‹œ, ์•”์‹œ์ (๋ณต์…€ ๊ธฐ๋ฐ˜) ๋ชจ๋ธ๋ง์˜ ๊ฐ•๋ ฅํ•œ ๊ธฐ๋Šฅ์„ ๊ฒฐํ•ฉํ•ฉ๋‹ˆ๋‹ค.

3DXpert๋Š” AM์ด ๋˜์ง€๋Š” ๋ชจ๋“  ๊ณผ์ œ๋ฅผ ์ฒ˜๋ฆฌํ•  ์ˆ˜ ์žˆ๋„๋ก ๋„์™€๋“œ๋ฆฝ๋‹ˆ๋‹ค. ๋ฐ˜๋ณต์ ์ธ ์ž‘์—…์ด๋‚˜ ํŠธ๋ ˆ์ด์—์„œ ๋ฐ˜๋ณต์ ์œผ๋กœ ๋ฐœ์ƒํ•˜๋Š” ํŒŒํŠธ ์œ ํ˜•์— ์ง๋ฉดํ–ˆ์„ ๋•Œ 3DXpert๊ฐ€ ๋งŽ์€ ์ž‘์—…์„ ๋Œ€์‹  ์ฒ˜๋ฆฌํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ์ง€์‹์„ ์Šคํฌ๋ฆฝํŠธ๋กœ ์บก์ฒ˜ํ•˜๊ณ  AI๋ฅผ ์‚ฌ์šฉํ•˜์—ฌ ์œ ์‚ฌํ•œ ๋ถ€๋ถ„์„ ๊ทธ๋ฃนํ™”ํ•˜๊ณ  ์†”๋ฃจ์…˜์„ ์ ์šฉํ•˜๋ฉด ๋” ๋ถ€๊ฐ€๊ฐ€์น˜๊ฐ€ ๋†’์€ ์—…๋ฌด์— ์ง‘์ค‘ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ์ž์„ธํžˆ ์•Œ์•„๋ณด๊ธฐ

์„œํฌํŠธ ๋ฏธํฌํ•จ

DMP Factory 350 Dual์€ NoSupports ๊ธฐ์ˆ ๊ณผ ํ˜ธํ™˜๋˜์ง€ ์•Š์Šต๋‹ˆ๋‹ค. ๋…ธ์„œํฌํŠธ๋Š” ์ง€์ง€ ๊ตฌ์กฐ๋ฌผ ์—†์ด ๊ธˆ์† ํŒŒ์šฐ๋” ๋ฒ ๋“œ ์ธ์‡„๋ฅผ ๊ฐ€๋Šฅํ•˜๊ฒŒ ํ•˜์—ฌ ์ƒ์‚ฐ ๋ฐ ๋ฐฐ์†ก์„ ๊ฐ€์†ํ™”ํ•ฉ๋‹ˆ๋‹ค. ์ž์„ธํžˆ ์•Œ์•„๋ณด๊ธฐ

ํ•˜์ด๋ธŒ๋ฆฌ๋“œ ์ •๋ ฌ

DMP Flex 350 Dual์€ ํ•˜์ด๋ธŒ๋ฆฌ๋“œ ์ •๋ ฌ๊ณผ ํ˜ธํ™˜๋ฉ๋‹ˆ๋‹ค. ํ•˜์ด๋ธŒ๋ฆฌ๋“œ ์–ผ๋ผ์ธ๋จผํŠธ๋Š” ๊ฐ์‚ฐ ๋ฐ ์ ์ธต ์ œ์กฐ ๊ธฐ์ˆ ์„ ๊ฒฐํ•ฉํ•˜์—ฌ ๊ธˆ์† 3D ํ”„๋ฆฐํŒ… ๋ถ€ํ’ˆ์„ ์ƒ์‚ฐํ•  ์ˆ˜ ์žˆ๋Š” ๋น„์šฉ ํšจ์œจ์ ์ธ ์†”๋ฃจ์…˜์„ ์ œ๊ณตํ•ฉ๋‹ˆ๋‹ค. ์ด ํ•˜์ด๋ธŒ๋ฆฌ๋“œ ์ ‘๊ทผ ๋ฐฉ์‹์„ ํ†ตํ•ด ์‚ฌ์šฉ์ž๋Š” ๋‘ ๊ฐ€์ง€ ๋ฐฉ๋ฒ•์˜ ๊ฐ•์ ์„ ํ™œ์šฉํ•˜์—ฌ ๊ธฐ์กด ๊ฐ€๊ณต๋งŒ์œผ๋กœ๋Š” ๊ตฌํ˜„ํ•  ์ˆ˜ ์—†๋Š” ๋ณต์žกํ•œ ํ˜•์ƒ์„ ์ˆ˜์šฉํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

ํ•˜์ด๋ธŒ๋ฆฌ๋“œ ์–ผ๋ผ์ธ๋จผํŠธ ๋ธŒ๋กœ์…” ๋‹ค์šด๋กœ๋“œ
๋ถ€์†ํ’ˆ

๋ณผ๋ฅจ ๊ฐ์†๊ธฐ ๋ชจ๋“ˆ

์ด ๋ชจ๋“ˆ์„ ์‚ฌ์šฉํ•˜๋ฉด ๋™์ผํ•œ ํ”„๋ฆฐํ„ฐ๋กœ ์†Œํ˜• ์—ฐ๊ตฌ ๋ถ€ํ’ˆ์„ ์ธ์‡„ํ•˜๊ณ  ์ƒ์‚ฐ ๊ธฐ๋Šฅ์„ ์œ ์ง€ํ•  ์ˆ˜ ์žˆ์–ด ํˆฌ์ž ํšจ๊ณผ๋ฅผ ๊ทน๋Œ€ํ™”ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ํŒŒ์šฐ๋”์˜ 10๋ถ„์˜ 1๋งŒ ์žˆ์œผ๋ฉด ๋” ์ด์ƒ ์ด์ƒ‰์ ์ธ ํ•ฉ๊ธˆ ์‹คํ—˜์— ์ œ์•ฝ์ด ์—†์Šต๋‹ˆ๋‹ค! ๋”๋ณด๊ธฐ

DMP ๊ฒ€์‚ฌ 

DMP ๊ฒ€์‚ฌ๋ฅผ ์‚ฌ์šฉํ•˜๋ฉด ๊ฒ€์ฆ๋œ ์ž๋™ ๋ถ„์„์œผ๋กœ 2์ฐจ ๊ฒ€์‚ฌ๋ฅผ ์ตœ์†Œํ™”ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ์ธ์‡„ํ•˜๊ธฐ ์ „์— ์ˆ˜์ • ์กฐ์น˜๋ฅผ ์ทจํ•˜์„ธ์š”! ์ €ํฌ ์•Œ๊ณ ๋ฆฌ์ฆ˜์ด ๊ฐ์ง€ํ•ฉ๋‹ˆ๋‹ค:

  • ์œตํ•ฉ ๋ถ€์กฑ
  • ๋’คํ‹€๋ฆผ
  • ์•„๋ž˜๋กœ ํ–ฅํ•œ ํ‘œ๋ฉด ๊ฑฐ์นจ๋„
  • ๋ฆฌ์ฝ”ํŒ… ํ’ˆ์งˆ

๋”๋ณด๊ธฐ

DMP ๋ชจ๋‹ˆํ„ฐ๋ง 

์ œํ’ˆ ํ’ˆ์งˆ์— ๋Œ€ํ•œ ํ˜„๋ช…ํ•œ ๊ฒฐ์ •์„ ์œ„ํ•œ ์‹ค์‹œ๊ฐ„ ๊ณต์ • ๋ชจ๋‹ˆํ„ฐ๋ง ๋ฉœํŠธํ’€๊ณผ ๋น„์ „ ๋ฐ์ดํ„ฐ๋ฅผ ๋‚˜๋ž€ํžˆ ๋™๊ธฐํ™”ํ•˜์—ฌ ๋” ๋†’์€ ํ’ˆ์งˆ์˜ ๊ฒฐ๊ณผ๋ฌผ์„ ์–ป์„ ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.  ๋”๋ณด๊ธฐ 

DMP Factory 350 ๋“€์–ผ์— ์ด์ƒ์ ์ธ ์• ํ”Œ๋ฆฌ์ผ€์ด์…˜

Cutaway of a DLR 3D Printed DMP Fuel Injector

ํ•ญ๊ณต์šฐ์ฃผ ๋ฐ ๋ฐฉ์œ„

ํ•ญ๊ณต์šฐ์ฃผ ๋ฐ ๋ฐฉ์œ„

์—ด๊ตํ™˜๊ธฐ, EVTOL ๋ชจํ„ฐ ๋ถ€ํ’ˆ, ์—ฐ๋ฃŒ ์ธ์ ํ„ฐ, ์Šค์›”๋Ÿฌ, ๋ฏน์„œ, ๊ณ ์ •์ž ๋‚ ๊ฐœ, ์ž„ํŽ ๋Ÿฌ ๊ทน์ดˆ์Œ์†, ์—ฐ์†Œ๊ธฐ ๋ถ€ํ’ˆ
Semiconductor Cooler with Fluid with Cross Section

๋ฐ˜๋„์ฒด

๋ฐ˜๋„์ฒด

์›จ์ดํผ ํ…Œ์ด๋ธ”, ์œ ์ฒด ๋งค๋‹ˆํด๋“œ, ์„ ํ˜• ์Šคํ…Œ์ด์ง€ ๋ƒ‰๊ฐ๊ธฐ, ์ƒค์›Œํ—ค๋“œ, ๊ฐ€์Šค ๊ณต๊ธ‰ ์žฅ์น˜ ๋ฐ ํ˜ผํ•ฉ๊ธฐ
3D Printed Laserform Heat Exchanger for Aerospace

์ž๋™์ฐจ

์ž๋™์ฐจ

๋ธŒ๋ž˜ํ‚ท, ํ•˜์šฐ์ง•, ์—ด ๊ตํ™˜๊ธฐ, ๋งค๋‹ˆํด๋“œ, ์ ์‘ํ˜• ๋ƒ‰๊ฐ ๋„๊ตฌ, ์ค‘๊ณต์—…์šฉ ํˆด ์‚ฝ์ž…๋ฌผ, ๋ฐฐํ„ฐ๋ฆฌ ๋ฐ ์ „๊ธฐ ๋‹จ์ž ๊ตฌ์„ฑํ’ˆ
A 3D printed Gas Mixer

ํƒ„์†Œ ํฌ์ง‘

ํƒ„์†Œ ํฌ์ง‘

๊ฐ€์Šค ์ ‘์ด‰๊ธฐ, ์—ด ๊ตํ™˜๊ธฐ, ๊ฐ€์Šค ์‘์ถ•๊ธฐ
3D Printed Crown Copings Produced on the 3D Systems DMP Dental 100 SM

์น˜๊ณผ

์น˜๊ณผ

๋ถ€๋ถ„, ์ž„ํ”Œ๋ž€ํŠธ, ํฌ๋ผ์šด ๋ฐ ๋ธŒ๋ฆฟ์ง€, ๊ต์ • ์žฅ์น˜, ์ˆ˜์ˆ ์šฉ ๊ฐ€์ด๋“œ, ์ฃผ์กฐ ํŒจํ„ด
์ „๋ฌธ๊ฐ€์™€ ์ƒ๋‹ดํ•˜๊ธฐ

DMP Factory 350 ๋“€์–ผ ํ”„๋ฆฐํ„ฐ์— ์ผ๋ฐ˜์ ์œผ๋กœ ์‚ฌ์šฉ๋˜๋Š” ์žฌ๋ฃŒ

Thales Metal Bracket LaserForm Titanium Gr. 5

LaserForm Ti Gr5 (A)

๊ณ ๊ฐ•๋„, ๊ฒฝ๋Ÿ‰, ์šฐ์ˆ˜ํ•œ ์ƒ์ฒด ์ ํ•ฉ์„ฑ

3D Systems DMP Metal LaserForm Ti Gr 23

LaserForm Ti Gr23 (A)

๊ณ ๊ฐ•๋„, ๊ฒฝ๋Ÿ‰, ์šฐ์ˆ˜ํ•œ ์ƒ์ฒด ์ ํ•ฉ์„ฑ - Gr5๋ณด๋‹ค ์‚ฐ์†Œ ํ•จ๋Ÿ‰ ๋‚ฎ์Œ

LaserForm AlSi10MG(A) Heat Exchanger

LaserForm AlSi10Mg (A)

์šฐ์ˆ˜ํ•œ ๊ธฐ๊ณ„์  ํŠน์„ฑ ๋ฐ ์—ด์ „๋„์„ฑ

The 3D Systems ProX DMP 350 delivers ALSi7mg0.6 (A) material for metal additive

LaserForm AlSi7Mg0.6 (A)

๊ฒฝ๋Ÿ‰, ์šฐ์ˆ˜ํ•œ ๊ธฐ๊ณ„์  ํŠน์„ฑ ๋ฐ ํ–ฅ์ƒ๋œ ์—ด์ „๋„์„ฑ

์ด ํ”„๋ฆฐํ„ฐ๋ฅผ ๊ตฌ๋งคํ•˜๊ธธ ์›ํ•˜์‹ญ๋‹ˆ๊นŒ?

๋‹ค์Œ ์ œํ’ˆ๋„ ์‚ดํŽด๋ณด์„ธ์š”.

DMP Factory 350 3D printer

DMP Factory 350

์• ํ”Œ๋ฆฌ์ผ€์ด์…˜ ๊ฐœ๋ฐœ, R&D ๋ฐ ์ƒ์‚ฐ์„ ์œ„ํ•ด ์„ค๊ณ„๋œ ์ค‘ํ˜• ๋‹จ์ผ ๋ ˆ์ด์ €

DMP Flex 350 3D printer

DMP Flex 350

์• ํ”Œ๋ฆฌ์ผ€์ด์…˜ ๊ฐœ๋ฐœ, R&D ๋ฐ ์ƒ์‚ฐ์„ ์œ„ํ•ด ์„ค๊ณ„๋œ ์ค‘ํ˜• ๋‹จ์ผ ๋ ˆ์ด์ €

DMP Flex 350 3D printer hero

DMP Flex 350 Dual

์• ํ”Œ๋ฆฌ์ผ€์ด์…˜ ๊ฐœ๋ฐœ, R&D ๋ฐ ์ƒ์‚ฐ์„ ์œ„ํ•ด ์„ค๊ณ„๋œ ์ค‘ํ˜• ๋“€์–ผ ๋ ˆ์ด์ €

DMP Flex 350 Triple 3D printer

DMP Flex 350 Triple

์•ˆ์ •์ ์ด๊ณ  ๋ฐ˜๋ณต ๊ฐ€๋Šฅํ•œ ์ƒ์‚ฐ์„ ์œ„ํ•œ ์ค‘ํ˜• 3-๋ ˆ์ด์ € ์›Œํฌํฌ์Šค